Auto Tuning Identification Error

Identification process in MCAT, and explains how to troubleshoot faults and warnings that occur during the measurement process. This motor parameter identification process is an extension of the PMSM sensorless control application, however, this application note describes only the motor identification tab of the MCAT tool.

-->

Motor Overload Protection (i2t)¶ This feature limits the overcurrent injected into the motor to prevent damage from overheating. This occurs because certain routers do not support the Receive Window Auto-Tuning feature. Note Since the release of Windows 7, Receive Window Auto-Tuning is now available for programs that use the Windows Internet (WinINet) application programming interface (API) for HTTP requests instead of WinHTTP. Some examples of programs that use WinINet for HTTP traffic include Internet Explorer, Outlook, and Outlook Express. Apr 07, 2020  The Receive Window Auto-Tuning feature lets the operating system continually monitor routing conditions such as bandwidth, network delay, and application delay. Therefore, the operating system can configure connections by scaling the TCP receive window to.

Azure SQL Database is an automatically managed data service that constantly monitors your queries and identifies the action that you can perform to improve performance of your workload. You can review recommendations and manually apply them, or let Azure SQL Database automatically apply corrective actions - this is known as automatic tuning mode.

Identification

Automatic tuning can be enabled at the server or the database level through the Azure portal, REST API calls and T-SQL commands.

Aug 08, 2014  Out the box, balanced gimbal, and auto tune doesn't work well with my camera. What a let down. One of the reasons why I wanted the Ronin was for. Aug 08, 2014 Out the box, balanced gimbal, and auto tune doesn't work well with my camera. What a let down. One of the reasons why I wanted the Ronin was for the Autotune feature and turns out it was a let down. But if FM is you main concern, auto tuning with RDS capability, and auto channel storage allocation does at least work very well. And if you wish to re-allocate a tuned FM station to a different storage number this is at least quite easily done.

Note

For Managed Instance, the supported option FORCE_LAST_GOOD_PLAN can be configured through T-SQL only. Portal based configuration and automatic index tuning options described in this article do not apply to Managed Instance.

Note

Configuring Automatic tuning options through ARM (Azure Resource Manager) template is not supported at this time.

Enable automatic tuning on server

On the server level you can choose to inherit automatic tuning configuration from 'Azure Defaults' or not to inherit the configuration. Azure defaults are FORCE_LAST_GOOD_PLAN is enabled, CREATE_INDEX is enabled, and DROP_INDEX is disabled.

Important

As of March, 2020 changes to Azure defaults for automatic tuning will take effect as follows:

  • New Azure defaults will be FORCE_LAST_GOOD_PLAN = enabled, CREATE_INDEX = disabled, and DROP_INDEX = disabled.
  • Existing servers with no automatic tuning preferences configured will be automatically configured to INHERIT the new Azure defaults. This applies to all customers currently having server settings for automatic tuning in an undefined state.
  • New servers created will automatically be configured to INHERIT the new Azure defaults (unlike earlier when automatic tuning configuration was in an undefined state upon new server creation).

Azure portal

To enable automatic tuning on Azure SQL Database logical server, navigate to the server in Azure portal and then select Automatic tuning in the menu.

Note

Please note that DROP_INDEX option at this time is not compatible with applications using partition switching and index hints and should not be enabled in these cases. Dropping unused indexes is not supported for Premium and Business Critical service tiers.

Select the automatic tuning options you want to enable and select Apply.

Automatic tuning options on a server are applied to all databases on this server. By default, all databases inherit configuration from their parent server, but this can be overridden and specified for each database individually.

REST API

Find out more about using REST API to enable Automatic tuning on a server, see SQL Server Automatic tuning UPDATE and GET HTTP methods.

Enable automatic tuning on an individual database

The Azure SQL Database enables you to individually specify the automatic tuning configuration for each database. On the database level you can choose to inherit automatic tuning configuration from the parent server, 'Azure Defaults' or not to inherit the configuration. Azure Defaults are set to FORCE_LAST_GOOD_PLAN is enabled, CREATE_INDEX is enabled, and DROP_INDEX is disabled.

Tip

The general recommendation is to manage the automatic tuning configuration at server level so the same configuration settings can be applied on every database automatically. Configure automatic tuning on an individual database only if you need that database to have different settings than others inheriting settings from the same server.

Azure portal

Auto Tuning Identification Error 10

To enable automatic tuning on a single database, navigate to the database in Azure portal and select Automatic tuning.

Individual automatic tuning settings can be separately configured for each database. You can manually configure an individual automatic tuning option, or specify that an option inherits its settings from the server.

Please note that DROP_INDEX option at this time is not compatible with applications using partition switching and index hints and should not be enabled in these cases.

Once you have selected your desired configuration, click Apply.

Rest API

Find out more about using REST API to enable Automatic tuning on a single database, see SQL Database Automatic tuning UPDATE and GET HTTP methods.

Auto Tuning Identification Error Free

T-SQL

To enable automatic tuning on a single database via T-SQL, connect to the database and execute the following query:

Setting automatic tuning to AUTO will apply Azure Defaults. Setting it to INHERIT, automatic tuning configuration will be inherited from the parent server. Choosing CUSTOM, you will need to manually configure automatic tuning.

To configure individual automatic tuning options via T-SQL, connect to the database and execute the query such as this one:

Setting the individual tuning option to ON, will override any setting that database inherited and enable the tuning option. Setting it to OFF, will also override any setting that database inherited and disable the tuning option. Automatic tuning option, for which DEFAULT is specified, will inherit the automatic tuning configuration from the server level settings.

Important

In case of active geo-replication, Automatic tuning needs to be configured on the primary database only. Automatically applied tuning actions, such are for example index create or delete will be automatically replicated to the read-only secondary. Attempting to enable Automatic tuning via T-SQL on the read-only secondary will result in a failure as having a different tuning configuration on the read-only secondary is unsupported.

Find our more abut T-SQL options to configure Automatic tuning, see ALTER DATABASE SET Options (Transact-SQL) for SQL Database server.

Disabled by the system

Automatic tuning is monitoring all the actions it takes on the database and in some cases it can determine that automatic tuning can't properly work on the database. In this situation, tuning option will be disabled by the system. In most cases this happens because Query Store is not enabled or it's in read-only state on a specific database.

Permissions

Auto Tuning Identification Error Code

As automatic tuning is Azure feature, to use it you will need to use Azure's built-in RBAC roles. Using SQL Authentication only will not be sufficient to use the feature from Azure portal.

Auto

To use automatic tuning, the minimum required permission to grant to the user is Azure's built-in SQL DB contributor role. You can also consider using higher privilege roles such are SQL Server Contributor, Contributor and Owner.

Configure automatic tuning e-mail notifications

See automatic tuning e-mail notifications guide.

Next steps

Auto Tuning Identification Error

Auto Tuning Identification Error Chart

  • Read the Automatic tuning article to learn more about automatic tuning and how it can help you improve your performance.
  • See Performance recommendations for an overview of Azure SQL Database performance recommendations.
  • See Query Performance Insights to learn about viewing the performance impact of your top queries.